Home About Us Quality
Assurance
Customer
Comments
FAQ's Order
Brochure
Contact Us Download
Brochure
Download
Price List
Download
Instructions
StowAway Drawer with Dividers StowAway Drawer Tray StowAway Drawer Tray with Dividers

Drawer Dividers
StowAway Drawers™ can be left completely open or they may be compartmentalized. When used as a drawer, the door is fastened closed so that the entire drawer slides out when pulled. A Divider Kit contains 8 dividers and they are made from .100 thick 5052 aluminum alloy. They are fastened into the drawers and trays using 3M® VHB® (Very High Bond) Tape (supplied). In industry this tape take the place of rivets, spot welds, and other permanent fasteners and so when positioning these dividers great care must be taken to place them in their final positions.

Pullout Trays
Pullout Trays are easily installed in StowAway™ Drawers. The Tray Slide rails are mounted to the inside walls of the drawer with stainless steel screws and lock nuts and the Pullout Tray is simply set on the rails and pushed in. To use the Pullout Trays the door is left in the hinged position (not fastened closed). One or two trays can be installed in a drawer.

Pullout Tray Dividers
Dividers are available in sets of 6 and are made from .100 5052 aluminum alloy. They are fastened into the drawers and trays using 3M® VHB® (Very High Bond) Tape (supplied). In industry this tape take the place of rivets, spot welds, and other permanent fasteners and so when positioning these dividers great care must be taken to place them in their final positions.